How to Change Blade on Dewalt Miter Saw

When it comes to electrical equipment for woodworking, you simply may not leave out Dewalt. In the enterprise of desk saws, power drills, routers, miter saws, and extra, understanding a way to update a sure component is essential. Among those gear, Dewalt miter saws have special varieties of models that range in the capacity to bevel to the proper or left, sliding miter saws, or single-bevel fashions (left bevel best). These varieties of fashions use a 12-inch circular noticed blade. Now this guide will help you exchange the Dewalt miter noticed blade. You can actually do it in just a couple of minutes.

Steps to comply with

Step #1

Be positive to unplug the miter noticed from the hole first before doing whatever with the tool.

Step #2

After taking step one, pull out the locking pin and start to elevate the miter noticed blade to its maximum role. Then if you could see the blade shield, lift it up and maintain it along with your proper hand.

Step #3

From the blade protection, find the bracket screw just upfront of the noticed shaft bolt. You ought to loosen this screw by turning it counterclockwise twice. Then increase the top blade shield as far as it will go.

Step #4

With your hand, slowly flip the noticed blade via hand. Then push within the spindle lock button on the right side of the saw blade. If the spindle lock is depressed as a great deal as feasible, then the blade needs to be locked securely in the region.

Step # 5

With your proper hand, you have to maintain the spindle lock and start loosening the spindle bolt clockwise using your left hand on the wrench that came with the noticed. After doing so, you want to get rid of the tree bolt and outer washing machine, then you can raise the saw blade from the tree.

Step # 6

In the arbor, you currently need to put a brand new saw blade. Make sure the carbide teeth are on the bottom of the blade pointing towards the rear of the saw. Next, you want to tighten the axle bolt and washer onto the axle with the usage of the wrench to secure the blade in the region. With your proper hand, you can now release the axle lock.

Step # 7

On the screw on the blade guard bracket, be sure to slide the upper blade protect down. Then tighten the screw to secure the top shield. Let the lowest defend cover the lowest of the noticed blade.

Step # 8

And this is! Now you could plug within the noticed and do take a look at the cut just to make sure you did it efficaciously.